Wireless HD Monitoring Solution
The CW-1 is a wireless transmission system that transmits full HD 1080p/30 audio and video. With less than 1ms of latency, you can monitor your video source in real-time at up to 330ft line of sight.
Reliable Wireless Video
The CW-1 automatically scans and utilizes special DFS frequencies on the 5ghz Frequency band to minimize wireless interference from other devices in any environment or situation.
UNCOMPRESSED FULL HD
The CW-1 transmits uncompressed 10 bit 1080P Full HD 4:2:2 video. That means there will be less than 1ms of latency and what you see on the camera is what you get on the monitor with no loss in image quality.
The CW-1’s transmitter and receiver are the lightest and most compact units of their kind in the marketplace today. Perfect for handheld rigs and setups on the go!
Users are able to utilize various mounting options as the CW-1 as the Transmitter and Receiver are ultra-compact. In addition, the Receiver comes with a 1/4 20 screw hole on both the back-side and bottom of the unit.
- YCbCr 4:2:2 10-bit
- 1080i: 59.94/50Hz 1080p: 30/29.97/25/24/23.98Hz 720: 59.94/50Hz 525i: 59.94Hz / 525p: 59.94Hz 625i: 50Hz / 625p: 50Hz
- SXGA, XGA, SVGA, VGA
RX: 3.8 (W) x 2.2 (D) x 0.8 (H) inches
RX: 96 (W) x 55 (D) x 20 (H) mm
RX: 2.10 oz approx
RX: 59 oz approx.
How far will the CW-1 transmit?
The CW-1 will transmit up to 330 feet free-line-of-sight (without any obstructions between the TX and RX). Please note that if any dense material such as metal, concrete, water, people, etc. come between the Transmitter and Receiver, the wireless signal strength will decrease and the transmission range may vary.
What is the recommended setup for maximum performance?
We recommend to minimize the amount of dense materials (such as metal, concrete, water, people, etc.) from getting between the transmitter and receiver as these will weaken the units signal strength. This commonly is achieved by mounting or placing the Receiver unit up about 10 feet in the air to be overhead of any obstacles.
Can I use multiple pairs of systems in the same space?
Yes. When using multiple pairs of systems in the same space, please make sure the Receiver units are spaced out about 5-10 feet from one another for best results. We recommend to use no more than 3-4 systems to maximize the number of available frequencies during use.
How is the Transmitter powered?
The Transmitter is powered via any 5V(1.5A) USB power source. Please note that the CW-1 system does not include a power source for the Transmitter and one will need to be purchased seperately.
How many channels does the CW-1 operate on?
- US version: 7
- EU version: 5
- Asia version: 7
Can I transmit video from the CW-1 TX directly to a laptop or mobile device?
No. The CW-1 TX will only communicate to its paired RX.
Will other CW-1 RXs or any 5GHz RX be able to see my video transmission?
No. The CW-1 signal is encrypted with WPA2-PSK (AES) and the TX will only communicate to its paired RX.
Will the CW-1 transmit 4k content?
No. The CW-1’s maximum compatible resolution is 1080/60p.