ENDURA Batteries


ENDURA
<< Back
bar
ENDURA-HL9 (E-HL9)
 
 

ENDURA-HL9 (E-HL9)

88Wh Li-ion V-Mount High Load Battery with PowerLink & Digi-View

  • Capacity : 88Wh(14.4V/6.15Ah)
  • Typical camera run-time : 3 hours approximately (@30W)
  • Dimensions : 3.35(W)x5.51(H)x2.28(D) inches
  • Weight : 1.63 lbs approx

With its high capacity and high load discharge of 10.0 Amps at 120W, the E-HL9 is an all-round top performer. Our exclusive PowerLink connects two E-HL9 batteries for a total power capacity of 176Wh. The 5 LED power status display gives an accurate reading of capacity in 20% increments. The E-HL9 supports Digi-View for reading battery levels in many of today’s camera viewfinders. Battery Management System (BMS) can be used for enhanced diagnostics and a comprehensive review of the battery’s history of use.

status
E-HL9 Power Status
This is an accurate display of the E-HL9’s remaining power. Its 6-step LED status displays capacity remaining in 20% increments plus the last 10%. Visually and instantly indentified at any time or shown in the camera viewfinder via Digi-View.
bar
ENDURA-HL9S (E-HL9S)
 
 

ENDURA-HL9S (E-HL9S)

88Wh Li-ion V-Mount High Load Battery

  • Capacity : 88Wh(14.4V/6.15Ah)
  • Typical camera run-time : 3 hours approximately (@30W)
  • Dimensions : 3.35(W)x5.59(H)x1.97(D) inches
  • Weight : 1.59 lbs approx

The new E-HL9S is an economical alternative pack with the same single unit power capacity as the E-HL9. Its 10.0 Amp/120W high load discharge translates into a 50% improvement over similar models in its classification. Its 3 LED power status indicator gives operators an immediate confirmation of the power level. E-HL9 series models have the same sleek and elegant housing as the E-10 and E-7 series.

status
E-HL9S Power Indicator
With an easy and quick visual display on the side of the battery, the power indicator references remaining charge status. 3 LED indicator shows battery levels and the center LED is used to indicate if the battery has been used since the previous complete charging event.
bar
ENDURA ELITE
 
 

ENDURA ELITE

136Wh Li-ion Power Cartridge V-Mount Battery with Digi-View

  • Capacity : 136Wh(14.8V/9.2Ah)
  • Typical camera run-time : 4.7 hours (@30W)
  • Dimensions : 3.94(W)x6.69(H)x2.76(D) inches
  • Weight : 2.76 lbs approx.

The ENDURA ELITE is the ideal battery for today’s generation of HD ENG/EFP cameras. At 136Wh capacity, the ELITE was created with a focus on the demands of HD power consumption. Two identical cartridges are housed inside a rugged outer casing allowing easy exchange of cartridges and reducing the cost of replacement batteries. The unique twin power cartridge design ensures the ELITE is fully compliant for air transportation and is the only Li-ion battery over 100Wh that is IATA flight friendly. The ELITE supports Digi-View and i-Trax Battery Management System, and is compatible on all IDX ENDURA V-Mount chargers.
PC-14 is the replacement power cartridge for use in ELITE batteries.

status
ELITE Power Status
The ENDURA ELITE battery is uniquely designed with a 10 step remaining power indicator. The remaining power is shown in increments of 10% by full/flashing combination of the 5 LEDs. This information can be shown in the camera viewfinder via Digi-View and a new ‘Mode’ LED can indicate preset and warning conditions of the battery to the operator.
bar
ENDURA-10(E-10)
 
 

Yellow Ribbon

ENDURA-10(E-10)

93Wh Li-ion V-Mount Battery with PowerLink & Digiview

  • Capacity : 93Wh(14.8V/6.3Ah)
  • Typical camera run-time : 3.25 hours (@30W)
  • Dimensions : 3.35(W)x5.51(H)x2.32(D) inches
  • Weight : 1.72 lbs approx

The compact and lightweight ENDURA-10 has a capacity of 93Wh. PowerLink technology allows two E-10 batteries to be docked together, doubling capacity up to 186Wh for longer run times and high power needs. An integrated 5 LED Power Status Display gives an accurate display of the battery capacity status. In addition to the unique PowerLink technology, the E-10 also supports Digi-View function and is compatible for use with IDX’s i-Trax Battery Management System (BMS) for full battery diagnostics.

status
E-10 Power Status
The Power Status is an accurate display of the battery’s remaining charge status. Its LED shows the remaining capacity in increments of 20% plus the last remaining 10%. This information can be shown in a camera viewfinder via Digi-View.
bar
ENDURA-10S(E-10S)
 
 

Yellow Ribbon

ENDURA-10S(E-10S)

93Wh Li-ion V-Mount Battery

  • Capacity : 93Wh(14.8V/6.3Ah)
  • Typical camera run-time : 3.00 hours (@30W)
  • Dimensions : 3.35(W)x5.59(H)x1.97(D) inches
  • Weight : 1.65 lbs approx

The ENDURA-10S is the stand alone version of the E-10 model. With its considerable capacity of 93Wh, it will satisfy the high power consumption of today’s HD cameras and accessories. The E-10S is one of the most durable batteries, retaining high capacity and optimum performance throughout its lifetime. The E-10S has an integrated 3 LED Power Indicator feature. For size, weight and features, the E-10S combines the highest standards of quality, safety and reliability.

status
E-10S Power Indicator
The Power Indicator is for quick reference of the battery’s charge status. A basic 3 LED indicator shows if the battery is full or requires charge. The center LED is used to indicate if the battery has been used since the previous full charge.
bar
ENDURA-7(E-7)
 
 

ENDURA-7(E-7)

68Wh Li-Ion V-Mount Battery with PowerLink and Digi-View

  • Capacity : 68Wh(14.8V/4.6Ah)
  • Typical camera run-time : 2.25 hours (@30W)
  • Dimensions : 3.35(W)x5.51(H)x1.57(D) inches
  • Weight : 1.19 lbs approx

With a distinctively small profile and weighing just over one pound, the E-7 can be seen powering professional broadcast cameras all over the world. Upgrade features of our exclusive PowerLink, which links two E-7 batteries together for double the capacity, and Digi-View, for viewing power use in camera viewfinders, are available as standard functions in this version. Advanced protection circuitry provides additional safety. Complete lifecycle histories of E-7 batteries can be viewed using our Battery Management System.

status
E-7 Power Status
With its multi-level LED read-out located on the side of the unit, quick and accurate checks of the power status can be viewed anytime. A 6 step LED set shows the capacity in increments of 20% plus the last remaining 10%. The same detailed data can be viewed via Digi-View on most professional camera viewfinders.
bar
ENDURA-7S(E-7S)
 
 

ENDURA-7S(E-7S)

68Wh Li-ion V-Mount Battery

  • Capacity : 68Wh(14.8V/4.6Ah)
  • Typical camera run-time : 2.25 hours (@30W)
  • Dimensions : 3.35(W)x5.59(H)x1.32(D) inches
  • Weight : 1.15 lbs approx.

The compact and lightweight ENDURA-7S has a capacity of 68Wh and features an integrated 3 step LED Power Indicator to display the battery capacity status. Economical and distinctive in design, the E-7S is built to the highest standards of quality, safety and reliability proven in all ENDURA batteries.

status
E-7S Power Indicator
The Power Indicator is for quick reference of the charge status on the E-7S. A simple 3 LED indicator shows if the battery is full or requires charging. The center LED indicates if the battery has been used since the previous full charge.
bar
BMS

BMS

i-Trax ENDURA Battery Management System

  • BMS i-Trax Compatible Chargers : VL-4Si, VAL-4Si
  • BMS i-Trax Compatible Batteries : ENDURA Series E-HL9, ELITE, E-10, E-7

BMS is a hardware and software solution which provides detailed data information form ENDURA System Lithium Ion batteries. Each ENDURA BMS compatible battery features IDX’s exclusive Digital Data Protocol which stores, in non-volatile memory, the most complete battery usage information available. BMS records the batteries data into a database and displays information such as charge cycles, discharge cycles, operating temperatures, high loads and more. Users can manipulate and manage the data to increase the life of their battery system.
 
BMS-VR – Data Recording and Retrieval Interface Module. Program Software and USB Cable are included.
 
Limited BMS information is available on models E-HL9S, E-10S and E-7S.