Transmission System
CW-5HD
Wireless HD Video Transmission System
High Definition signal that can be viewed wirelessly as much as 150 feet away
- Uncompressed wireless transmitter and receiver system for both HD-SDI and SD-SDI video signal processing.
- Multiple formats of video with two channels of SDI embedded audio.
- Transmission delay less than 1ms.
- Maximum range up to 100 feet (30m) through walls and up to 150 feet (50m) in line-of-sight conditions. Use in actual production may vary.
- Ships with an IDX V-Mount, allowing a direct attachment to an IDX battery for rear mounting on a camera or can be attached for DC operation via 4-pin XLR connector.
- Sleek and lightweight; weighing just 1.76 pounds, with no visible antenna array.
- Wireless transmission via MIMO/OFDM, operating between 5.1 - 5.8GHz frequencies. No special FCC license is required.
- Selection of four manual or auto-select frequencies with 256-bit encryption.
- TX features loop-through; RX outputs dual simultaneous signal.
- Unicast and multicast link mode selection.
- Confomance to major international engineering standards including FCC, CE and RoHS specifications.
CW-5HD TX Specifications:
- Frequency: 5.18GHz – 5.86GHz
- Tuning Range / Frequency selection: Four Selectable Channels or Auto Select
- Transmit Power: 89mW maximum
- Transmit Antenna: Internal 2dBi gain
- Transmit Method: MIMO
- Modulation: OFDM
- Latency: Less than 1ms
- Video Input: HD-SDI-SMPTE 292M / SD-SDI-SMPTE 259M-C (Auto-Sensing)
- Supported Video Profiles:
HD-1080i/59.94, 1080i/50, 1080p/29.97, 1080p/23.98 720p/59.94, 720p/50
SD-525i/59.94, 625i/50 - Audio Input: Two Channels SDI embedded
- Power Requirement: 10 – 17 VDC via battery plate or 4 pin XLR connector
- Power Consumption: 12W approx.
- Dimension (WxDxH): 158mm x 62mm x 188mm (6.23" x 2.44" x 7.41")
- Weight: Approx. 800g (1.76lbs)
- Operating Range:
0~40°C (32~104°F)
CW-5HD RX Specifications:
- Frequency: 5.18GHz – 5.86GHz
- Tuning Range / Frequency selection: Four Selectable Channels or Auto Select
- Receiving Antenna: Internal 2dBi gain
- Receive Method: MIMO
- Modulation: OFDM
- Latency: Less than 1ms
- Video Input: HD-SDI-SMPTE 292M / SD-SDI-SMPTE 259M-C (Auto-Sensing)
- Supported Video Profiles:
HD-1080i/59.94, 1080i/50, 1080p/29.97, 1080p/23.98 720p/59.94, 720p/50
SD-525i/59.94, 625i/50 - Audio Input: Two Channels SDI embedded
- Power Requirement: 10 – 17 VDC via battery plate or 4 pin XLR connector
- Power Consumption: 12W approx.
- Dimension (WxDxH): 158mm x 62mm x 188mm (6.23" x 2.44" x 7.41")
- Weight: Approx. 800g (1.76lbs)
- Operating Range:
0~40°C (32~104°F)